How to Prepare Your Logo for Embroidery
Send your digitizer the clearest version of your logo and tell them exactly where and how large it will be sewn. A stitch file for a cap and one for a jacket back can start from the same artwork and still need different stitch paths.
Measure the space on the garment
Measure the usable width and height in inches, centimeters or millimeters. On a cap, measure the front panel between the seams and note the curve. On a polo, check the space around a pocket or placket. On a jacket, decide how far the design should sit below the yoke. A photo with a ruler often answers a question that a logo file cannot.
Read the smallest lettering at its final size
Print the design at the size you plan to embroider. Look at the openings in letters such as “a” and “e,” the gap between two outlines, and any words beneath the main name. If those details already blend on paper, flag them for review. On a small left-chest logo, removing a second outline or enlarging a tagline may preserve more of the design’s character.
Send the source file and a color reference
A vector original or a clear PNG, JPG or PDF gives the studio a starting point. Include a reference image if a font, thread color or outline must match an existing uniform. Tell us which parts of a gradient or shadow matter. We can review a solid-color interpretation before digitizing. If your artwork also needs to scale for printing, see our vector redraw service.
Specify the fabric and machine format
A structured cap, a stretch polo and a denim jacket respond differently to stitches. Include the fabric, placement, any requested 3D puff effect, and the format your embroidery machine reads. If you need an editable source file as well as a machine file, put both in the brief.
Review a sew-out before a production run
Use fabric and backing similar to the final garment. Look for lettering that closes up, outlines that drift from the fill, or areas that pucker. If a revision is needed, send a straight-on photo and the measured size so the digitizer can compare the result with the artwork.
See digitizing examples by placement or send your artwork for digitizing. For a finished patch that will be applied to the garment, compare patch types and backings.
